Skip to content
Sumly

Roofing Calculator

Roof area from its footprint and pitch, in squares and shingle bundles.

In

Measure the footprint from the ground, eaves to eaves. The pitch is how many units the roof rises for every 12 it runs.

Out

Shingle bundles

43

14.3 squares including 10% waste

Roof surface area120.7 m²
Footprint108.0 m²
Pitch6 in 12, 26.6°
One square covers 100 ft² and takes three bundles of standard shingles. Add starter strip and ridge caps separately.

How the Roofing calculation works

The footprint is the roof seen from above, eaves included. A sloped roof has more surface than that: the footprint is multiplied by √(1 + (rise ÷ 12)²) for its pitch.

Roofing is sold by the square, which covers 100 ft². Waste is added for cuts: about 10% for a simple gable roof and 15% for hips and valleys.

Standard asphalt shingles come three bundles to the square, so bundles are squares × 3, rounded up.

Worked example

A 12 × 9 m footprint at a 6 in 12 pitch (26.6°) has 120.7 m² of roof surface. With 10% waste for a gable roof that's 14.3 squares, or 43 bundles of shingles.

The tool above opens with these numbers. Change them to run your own scenario, or press Reset to come back to this example.

Frequently asked questions

Cubic metres or yards of concrete, and bags of premix, for a slab or posts.

How much paint a room needs, and which tins to buy.

Rolls of wallpaper for a room, pattern repeat included.

Tiles and boxes for a floor or wall, with grout and waste allowed for.

Packs of laminate, vinyl or wood flooring for a room.

Volume, weight and bags of gravel, soil, sand or mulch for an area.

  • roofing calculator
  • roof pitch
  • shingle bundles
  • roofing squares
  • roof area